OpcDaCom

This driver is a wrapper to interface OPC-DA drivers with AdvancedHMI.

Properties
OpcServer	The specific name of the OPC server to connect to. This is very specific and can sometimes be difficult to find. For example, "RSLinx OPC Server" for RSLinx, "OPC.IwSCP" for Bosch
OpcServerPath	Default value of opcda://localhost is used when OPC Server is on same machine. Otherwise this is used to indicate the remote location of the server.
OpcTopic	Used by some OPC Servers such as RSLinx. This name will be defined within the OPC Server
OpcGroup	This is typically not used and automatically generated by the driver.
DisableSubscriptions	uses updating of subscriptions. This is useful in cases such as when hiding a form and there is no longer a need to refresh the values. Or when used with a Trend Chart, it can pause the charting.
PollRateOverride	This set the target rate for refreshing all of the subscriptions. When there are a large number of subscriptions that have to be split amongst sever requests, this value is divided by the number of requests required to determine the delay between each packet. A value of 0 will make the driver update as fast as the PLC will respond, but be cautious because it can reach rates less than 5ms and start to use a lot of resources.