AdvancedHMI Software
General Category => Support Questions => Topic started by: bachphi on October 15, 2018, 10:37:50 AM
-
I am using v399yBeta12.
I have a working PilotLight3Color w/ settings:
PLCaddressSelectColor2 B3:6/2
PLCaddressSelectColor3 B3:6/3
Everything is Working up to this point.
As soon as I add a Basic Label w/ PLCAddressVisible = B3:0/x will make my PilotLight flashing RED. Anyother other address like B3:1/0 will work fine
-
I tried w/ v3.99x worked.
Attempted to replace BasicLabel.vb and PilotLight3Color.vb from x to y , rebuilt => PilotLight still flashing red.
-
I have confirmed this to be a problem with the driver. A fix will be made and an update coming soon.
-
399yBeta13 have some weird things:
1. If just PilotLight3Color only, then trigger color2 green will display Red, trigger color3 red will also display Red.
2. When added a BasicLabel w/ PLCaddressVisible: B3:0/x, everything seemed to work, that is Pilot Light no flashing, Trigger green will display green, red will display red.
-
I tried this with just a PilotLight3Color not connected the PLC by setting SelectColor2 and SelectColor3 manually. It appears to work as expected. So this must mean there is something in the driver.
What do you have in PLCAddressSelectColor2 and PLCAddressSelectColor3 so I can try to replicate?
-
B3:8/0 & B3:8/1
-
Problem is confirmed. An update is coming soon.
-
V3.99y Beta 14 now posted
-
Seemed to be working now, Archie. Thanks.