Messages

1

Open Discussion / Re: Advanced HMI on Linux?

« on: August 09, 2024, 05:29:06 AM »

Hi, Archie,
I have to Phoenix Contact industrial 8" pcs,Which are only compatible with DDR3 1GB RAM. I tried more than 1GB RAM it won't work. Now window xp is the lightest OS in window family.still it needs 4gb Ram. Is that any other option
Like Linux OS to run ahmi with 1GB RAM computer?

Thanks,

2

Support Questions / Re: Advanced HMI controls not showing in toolbox/erros after built

« on: June 26, 2024, 06:28:34 AM »

Hi, Archie,
i have visual studio 2019 and i dont get my toolbox populated even after i set the option in tool/ general/ web forms designer/ toolbox popuatle automaticly TRUE. i am using the latest AHMI version

3

Support Questions / Modbus RTU network with delta PLC Schneider Altivar 12,Omron e5C Temp.Conroller

« on: December 18, 2020, 05:34:46 AM »

Hi, Archie
i am trying to set up Mdbus RTU network with  Altivar 12 VFD 1 Omron e5c Temp Controller ,delta PLC DVP 28SV11 and AHMI PC. My AHMI Communication setting is 19200 , 8N2 and addresses are  Node 1=AHMI, 2=DVP PLC 3 Altivar VFD and 4= Omron Temp controller. i cant read or write anything from any members of network. My wiring and comms. setting on every device is right.
i tried to communicate AHMI-delta PLC , AHMI to VFD, AHMI- Omron Temp. Controller. one to one individually
but i dint get any data on my digital Panel meter in AHMI.

My Questions are ,
1) is AHMI always master on the network.
2)On AHMI component's property (Digital Panel meter..etc)where i can enter the node number on network.
i can put Data Address but from which node we are getting it, i cant put in.

any help,

4

Open Discussion / Re: Selection scroll down list compactlogix

« on: March 17, 2018, 03:58:15 AM »

Thanks Archie,
Its working . I want to add/edit and delete the strings in array
To add new string I want to go to next empty place in the array. How can we  add /delete and edit array members?

5

Open Discussion / Re: Selection scroll down list compactlogix

« on: March 16, 2018, 03:09:52 PM »

i am getting this error after entering code for Current_Job

Error   BC30057   Too many arguments to 'Friend WithEvents EthernetIPforCLXCom1 As EthernetIPforCLXCom'.   AdvancedHMI

6

Open Discussion / Re: Selection scroll down list compactlogix

« on: March 16, 2018, 02:35:38 PM »

Thanks Archie,
now i can see the tags from array and select one. now i want to send selected tag to string type tag in PLC , "Current_Job" using a confirm selection button .
 how can i write selected value to Current_Job in PLC using Confirmation button.

7

Open Discussion / Selection scroll down list compactlogix

« on: March 15, 2018, 11:30:06 PM »

Hi
I have compactlogix(with Eip module) having array of 20 string type members Containing job names to be sent to
Other Eip device. I want to creat scroll down list on AHMI  displaying  All members of string array and user can select one of them and Send it to current job tag (string) in plc.

How can I create such selection list in AHMI.

Thanks in advance.

8

Open Discussion / Re: How to get connected with 3 Compactlogix in three different subnets

« on: March 11, 2018, 03:30:31 AM »

thanks,
i will be able to test it on Monday.
all three different subnets has their own devices with the subnet mask. i have to change them too. like 25.255.255.0 to 255.255.0.0

9

Open Discussion / Re: How to get connected with 3 Compactlogix in three different subnets

« on: March 10, 2018, 08:02:00 PM »

all three plcs are connected to single Layer-3 Switch/Router(V LAN Routing).

10

Open Discussion / Re: How to get connected with 3 Compactlogix in three different subnets

« on: March 10, 2018, 06:16:23 AM »

But my Computer running AHMI is on one of the subnet(PC ip is 192.168.1.2).do i need to point any gateway(router) to get out of the local subnet and talk to 192.168.2.3 and 192.168.3.3 as they are on different subnet then PC?

11

Open Discussion / How to get connected with 3 Compactlogix in three different subnets

« on: March 10, 2018, 12:30:38 AM »

How to get connected with 3 Compactlogix in three different subnets .
i have three compactlogix PLCs on three different subnets. (1). 192.168.1.3   (2).192.168.2.3     (3). 192.168.3.3
all PLCs are routed by router to comunicate with each other. how can i receive/send data in one AHMI project. between all three?
any router gateway property to be set?

Thanks in advance. 

12

Open Discussion / Re: Controllogix over DF1 Driver

« on: April 22, 2016, 09:38:29 AM »

Thanks Archie,
I tried this. Did not work.
I created an array  of 10 INT in my controllogix and mapped it with
File 7. And in advanced HMI I addressed  word N7:0 @bit level N7:0/0 to 0/9
And N7:1 2 3 4 as words
I tried to press the square illuminated button  (N7:0/0 and 0/1) dint work.
Has any body tried this before.?
What's wrong I am doing?

13

Open Discussion / Re: Controllogix over DF1 Driver

« on: March 27, 2016, 07:36:21 PM »

Yes, I have controllogix Plc without any communication card in chassis.
i have only one option to communicate with PLC is DF1(Rs232).
is there any way to communicate with Controllogix using RS232 (USB to Serial ) from PC running AHMI.
like we do with SLC. we have SLC/Micro DF1 driver . what is mapping? how i can do that using PLC/SLC.

14

Open Discussion / Controllogix over DF1 Driver

« on: March 25, 2016, 10:57:55 AM »

Hi,Archie ,
How can we communicate with  Controllogix over Df1 for compact/controllogix with AHMI

15

Open Discussion / visual studio community 2015 installation stuck on .NET frame work

« on: February 20, 2016, 08:09:16 AM »

visual studio community 2015 installation stuck on .NET frame work

I am trying to install Visual Studio community 2015 on my laptop with win-7 premium home with 1 Gb ram.
I am stuck on "Microsoft.NET frame work 4.6.1 developer pack applying" for over 12 hours. I tried twice same thing.

appreciate any help.