Show Posts

1

Support Questions / Re: OPC connection to remote server

« on: August 24, 2016, 12:07:55 AM »

no matter, Callback would have been convenient, but I can poll just as effectively so that's what I'll do. besides I only need to write and read every second or so for the poll and it will only be 16 bits this time. Love your software, has made my life a lot easier so no complaints.
Thanks for the help

2

Support Questions / Re: OPC connection to remote server

« on: August 23, 2016, 12:28:10 PM »

nope, never called back, it initializes them all to false, then updates once, but callback is never activated. Guess I'm down to polling

3

Support Questions / Re: OPC connection to remote server

« on: August 22, 2016, 08:11:32 PM »

LOL, I can understand that feeling of cringing. I did get it using your method, turned out when I checked it was a DCOM problem, that is fixed, now I can connect, but the connection will only last 2-3 changes of a bit, then never changes again. This I have no clue about. Your driver does do a callback does it not? or does it poll?

4

Support Questions / OPC connection to remote server

« on: August 22, 2016, 11:33:07 AM »

using OpcDaCom, I am tryint to connect to an OPC server on a remote server the server address is 10.224.220.109 using OPC expert https://opcexpert.com/ I can connect by just adding the address of the opc server and it finds Kepware.KEPServerEX.V5 and allows me to connect to it. Why can't I connect to it with Advanced HMI? I have tried changing opcda://localhost to remotehost, the IP address, and several other thnigs but nothing seems to work. What am I doing wrong?

5

Support Questions / Re: direct reading and writing to OPC in AHMI

« on: August 05, 2016, 03:38:46 PM »

Thanks Archie

6

Support Questions / direct reading and writing to OPC in AHMI

« on: August 05, 2016, 11:28:51 AM »

I know it's here in the forum but after 2 days searching I give up. Could someone point me to how to read and write to an opc server in AHMI without using a control, I have an need in my app for direct reads/writes to OPC and to/from a database, I use controls in some places but the direct reads and writes are easier. I found them here once, but now I can't find them and with 5TB of code on my hard drive I can't find it there either, any help would be appreciated, thanks in advance
Loving AHMI!!!!
and have posted about it more than once on FB LOL
ps only need the direct read and write code for OPC, I have the database handled, lol

7

Support Questions / Re: DataSubscriber 2

« on: February 04, 2016, 02:00:09 PM »

yes I am as soon as I can get this part of it to work. I Have several programs that just access opcdaauto,dll and they work OK, just didn't want to have to deal with that plus the graphics too.

8

Support Questions / DataSubscriber 2

« on: February 04, 2016, 01:31:10 PM »

OK I'm going to try this again. My company just upgraded their server and I can't send or receive any attachment period so I'll have to cut and paste the code. The problem I am having is I'm trying to add items using a loop and the code DataSubscriber21.PLCAddressValueItems.Add(New AdvancedHMIDrivers.PLCAddressItem() With {.SubscriptionID = CInt(records(x, 3)) - 1, .PLCAddress = records(x, 1)}) where Records is a string array containing the address I want to look at. I'm using the OPC driver and the program works fine except for one thing, It is taking 4.5 hours to add 772 items to the subscriber? I also just added this code a = e.PlcAddress.ToString & " = " & e.Values(0).ToString & "; subscription ID = " & e.SubscriptionID & vbCrLf & TextBox1.Text and I think that it has shown me what the problem is, but I don't know how to cure it. It seems that when you add an Item to the datasubscriber, it is using soe type of recursion to add it? anyways what I see is an output to the textbox of item 1 printed, item 1 printed, item 1 item two printed, item 1 printed, item 1 item 2 printed, item 1 item 2 1tem 3 printed, ant it progresses that way for each item I add. I'll paste all the code from main form below, the module named tracking only has 1 textbox on it and the data file is comma delimited and consists of two items per line of 772 lines, I'll include a 12 item list at end for sample purposes, but you'll have to make your own as OPC will have to be working for this example to run and the tags will have to exist on that opc server. Could someone tell what is going on and how to fix it. Aslo I've been programing since dartmouth basic came out so please lay off my style comment on on actual errors in code, not how I program. LOL

Public Class MainForm
'*******************************************************************************
'* Stop polling when the form is not visible in order to reduce communications
'* Copy this section of code to every new form created
'*******************************************************************************
Private FinishedStartUp As Boolean = False
Private start_time As DateTime
Private stop_time As DateTime
Private WriteToSQL As Boolean = False
Dim elapsed_time As TimeSpan
Dim firstscan As Boolean = False
Private First_start_time As DateTime
Private AlarmArray(2001) As String
Private WriteToTracking As Boolean = False
'*******************************************************************************
'* Stop polling when the form is not visible in order to reduce communications
'* Copy this section of code to every new form created
'*******************************************************************************
Private NotFirstShow As Boolean
Public records(773, 4) As String
Private Sub MainForm_FormClosing(sender As Object, e As FormClosingEventArgs) Handles Me.FormClosing
Tracking.Hide()
Me.Hide()
AdvancedHMIDrivers.Utilities.StopComsOnHidden(components, Me)
DataSubscriber21.PLCAddressValueItems.Clear()
OpcDaCom1.DisableSubscriptions = True
OpcDaCom1.Dispose()
Tracking.Dispose()
Me.Dispose()
End Sub
Private Sub MainForm_Load(sender As Object, e As EventArgs) Handles Me.Load
First_start_time = Now
Dim TempText As String
Tracking.Show()
Dim a As String = ""
Dim b As Integer = 0
ReadCSV()
DataSubscriber21.PLCAddressValueItems.Clear()
For x = 1 To 10 Step 1
If records(x, 2) <> "" Then
DataSubscriber21.PLCAddressValueItems.Add(New AdvancedHMIDrivers.PLCAddressItem() With {.SubscriptionID = CInt(records(x, 3)) - 1, .PLCAddress = records(x, 1)})
TempText = Tracking.TextBox1.Text
Tracking.TextBox1.Text = x.ToString & " - Tag name = " & records(x, 1) & ", error description = " & records(x, 2) & ", Subscription Id = " & records(x, 3) & vbCrLf & TempText
Tracking.TextBox1.Refresh()
Me.Refresh()
End If
Next x
stop_time = Now
Dim elapsed_Time As TimeSpan = DateTime.Parse(stop_time.ToString).Subtract(DateTime.Parse(First_start_time.ToString))
TempText = Tracking.TextBox1.Text
Me.Refresh()
Tracking.TextBox1.Text = "Time to load all parameters was" & elapsed_Time.ToString & vbCrLf & TempText
Me.Refresh()
End Sub
Private Sub ReadCSV() 'FileName As String)
Try
Dim WholeFile As String = ""
Dim LineData() As String
Dim FieldData() As String
Dim ParmCount As Integer = 1
Dim VarCount As Integer = 1
Dim FilePath As String = "C:\work\Alarm message lean.csv"
WholeFile = My.Computer.FileSystem.ReadAllText(FilePath)
LineData = Split(WholeFile, vbNewLine)
For Each LineOfText As String In LineData
VarCount = 1
FieldData = LineOfText.Split(",")
For Each WordOfText As String In FieldData
records(ParmCount, VarCount) = WordOfText
VarCount += 1
Next WordOfText
records(ParmCount, 3) = (ParmCount - 1).ToString
ParmCount += 1
Next LineOfText
Catch EX As Exception
Dim A As String
Dim CurrentDateTime As DateTime = DateTime.Now
Dim TimeStamp As String = vbCrLf & "current date and time = " & CurrentDateTime.ToString("yyyy/MM/dd - HH:mm:ss.ffffff") & vbCrLf
Dim ErrorLocation As String = "In - Form1 Private Sub ReadCSV(FileName As String)" & vbCrLf
Dim ErrorString As String = " current error = " & ErrorToString() & vbCrLf
Dim B As String = Tracking.TextBox1.Text
A = TimeStamp & ErrorLocation & ErrorString & B & vbCrLf
Tracking.TextBox1.Text = ""
Tracking.TextBox1.Text = A
End Try
End Sub
Private Sub INSERTDATA(ByVal MAIN_ASSY_VAR As String, ByVal SUB_ASSY_VAR As String, ByVal SUB_ASSY_NUM_VAR As String, ByVal CURRENT_STATE_VAR As String, ByVal SENDER_NAME_VAR As String, ByVal SENDER_VALUE_VAR As String, ByVal FULL_DATE_TIME_VAR As String, THIS_DATE_VAR As String, ByVal THIS_TIME_VAR As String, ByVal THIS_ID_VAR As String)
If WriteToSQL = False Then Exit Sub
Try
Dim MyConnect As New SqlClient.SqlConnection
MyConnect.ConnectionString = "Data Source=MESTEST\ONLINE;Integrated Security=False;User ID=SPIRE_SUN_SIMULATOR;Password=SPIRE_SUN_SIMULATOR;Connect TimeOut=15;Encrypt=False;TrustServerCertificate=False"
Dim MyCommand As SqlClient.SqlCommand = New SqlClient.SqlCommand()
Dim TodayTime1 As DateTime = Now
Dim ID As Guid
ID = Guid.NewGuid
MyCommand.Connection = MyConnect
MyCommand.CommandText = "INSERT INTO dbo.MACHINE_TIME (MAIN_ASSY, SUB_ASSY, SUB_ASSY_NUM, CURRENT_STATE, SENDER_NAME, SENDER_VALUE, FULL_DATE_TIME, THIS_DATE, THIS_TIME, THIS_ID) VALUES (@MAIN_ASSY, @SUB_ASSY, @SUB_ASSY_NUM, @CURRENT_STATE, @SENDER_NAME, @SENDER_VALUE, @FULL_DATE_TIME, @THIS_DATE, @THIS_TIME, @THIS_ID)"
MyConnect.Open()
MyCommand.Parameters.AddWithValue("@MAIN_ASSY", MAIN_ASSY_VAR)
MyCommand.Parameters.AddWithValue("@SUB_ASSY", SUB_ASSY_VAR)
MyCommand.Parameters.AddWithValue("@SUB_ASSY_NUM", SUB_ASSY_NUM_VAR)
MyCommand.Parameters.AddWithValue("@CURRENT_STATE", CURRENT_STATE_VAR)
MyCommand.Parameters.AddWithValue("@SENDER_NAME", SENDER_NAME_VAR)
MyCommand.Parameters.AddWithValue("@SENDER_VALUE", SENDER_VALUE_VAR)
MyCommand.Parameters.AddWithValue("@FULL_DATE_TIME", FULL_DATE_TIME_VAR)
MyCommand.Parameters.AddWithValue("@THIS_DATE", THIS_DATE_VAR)
MyCommand.Parameters.AddWithValue("@THIS_TIME", THIS_TIME_VAR)
MyCommand.Parameters.AddWithValue("@THIS_ID", THIS_ID_VAR)
MyCommand.ExecuteNonQuery()
MyConnect.Close()
Catch EX As Exception
Dim A As String
Dim CurrentDateTime As DateTime = DateTime.Now
Dim TimeStamp As String = vbCrLf & "current date and time = " & CurrentDateTime.ToString("yyyy/MM/dd - HH:mm:ss.ffffff") & vbCrLf
Dim ErrorLocation As String = "In - Form1 Private Sub InsertData()" & vbCrLf
Dim ErrorString As String = " current error = " & ErrorToString() & vbCrLf
Dim B As String = TextBox1.Text
A = TimeStamp & ErrorLocation & ErrorString & B & vbCrLf
TextBox1.Text = ""
TextBox1.Text = A
End Try
End Sub
Private Sub Form_VisibleChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.VisibleChanged
If NotFirstShow Then
AdvancedHMIDrivers.Utilities.StopComsOnHidden(components, Me)
Else
NotFirstShow = True
End If
End Sub
Private Sub DataSubscriber21_DataChanged(sender As Object, e As Drivers.Common.PlcComEventArgs) Handles DataSubscriber21.DataChanged
Dim a As String
Dim temptext As String = TextBox1.Text
a = e.PlcAddress.ToString & " = " & e.Values(0).ToString & "; subscription ID = " & e.SubscriptionID & vbCrLf & TextBox1.Text
stop_time = Now
TextBox1.Text = a & vbCrLf & temptext
Dim elapsed_Time As TimeSpan = DateTime.Parse(stop_time.ToString).Subtract(DateTime.Parse(First_start_time.ToString))
temptext = TextBox1.Text
TextBox1.Text = "Elapsed time = was" & elapsed_Time.ToString & vbCrLf & temptext
Me.Refresh()
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
End
End Sub
Private Sub Button3_Click(sender As Object, e As EventArgs) Handles Button3.Click
WriteToSQL = Not WriteToSQL
If WriteToSQL = True Then
Button3.BackColor = Color.Blue
Else
Button3.BackColor = Color.Red
End If
End Sub
End Class

Module Line Omron PLCs.Lay Up 01.Alarm

.Alarm[0000],[0]ETHERCAT COMMUCATION ERROR