Messages

1

Open Discussion / Re: AHMI to AB micro 820 communication

« on: January 29, 2021, 08:52:53 AM »

Dmroeder,
My pc ip is 192.168.1.1 , the plc is responding when I ping from command promp, not sure what is the reply as I dont have the pc next to me,  and yes that's my plc address.
I dont know from where to get the port number....maybe thats the problem..

2

Open Discussion / Re: AHMI to AB micro 820 communication

« on: January 29, 2021, 12:13:31 AM »

Hi Godra,

I use the CCW to connect to the plc.

@dmroeder how can I be sure that my project is trying to connect to the right adapter.

Thanks all for your help

3

Open Discussion / Re: AHMI to AB micro 820 communication

« on: January 28, 2021, 12:17:55 PM »

Hi,

Can you help on the following please,
When I build the solution on the button and pilot light that I've created I see the following 'no response from plc 192.168.1.10 Slot=0'  Now I cannot see any SLOT window in the EthernetIPforMicro800Com properties. How can I set the slot and from where can I find the slot number.

4

Open Discussion / Re: AHMI to AB micro 820 communication

« on: January 26, 2021, 11:59:14 AM »

Hello Archie,

The tags I used are the names of the inputs/outputs on the plc program ex._IO_EM_DO_01, is that ok?

Regarding communication the pc is seeing the plc..From where can I get the port no pls?

Thanks

5

Open Discussion / AHMI to AB micro 820 communication

« on: January 26, 2021, 09:08:07 AM »

Hi,
I am new to AHMI, I downloaded the software and added a button and a pilot light on the screen but these are showing ''no response from plc''.  Can you please tell me how to do the communication part, I've put in the plc ip address in the ''Ethernetipfor800'' properties but don't know from where to get the port no.
Another thing I am not sure about is from where to get the PLC address value of the button/pilot light.

Thanks