Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Ibrahim

Pages: [1] 2 3
1
Open Discussion / Re: What would you like to see in the next major release?
« on: September 29, 2015, 06:24:51 PM »
Hi All,

thanks to AdvancedHMI,
am waiting realy and many other people like me are waiting AdvancedHMI to work with http protocol or web interface.
 if possible.

many thnks

Ibrahim

2
Open Discussion / Database connection With the AHMI
« on: July 04, 2015, 06:44:21 AM »
Hi,

any instructions plz about the AdvancedHMI connecting with database(Mysql or ms access) for the newbies.

many thnks

Ibrahim

3
Open Discussion / Re: HTTP protol or web interface
« on: June 12, 2015, 04:16:07 AM »
Hi,

thanks alot,

is there any one can give us about how the plc can read data from the database plz

thanks again

4
Open Discussion / Re: HTTP protol or Web interface
« on: May 29, 2015, 06:00:20 AM »
Hi Archie,

thanks for your support,
just wanted to ask  you in the coming future that AHMI can be available  http protocol.

thanks

Ibrahim

5
Support Questions / Newer Version error
« on: April 17, 2015, 02:28:22 AM »
Hi,

am using microsoft visual basic express 2010
and i have tried to download and run the advancedhmi 3.98d which is the current running version.
after i tried to run am getting this error.

" the selected file is a solution file, but was created by a newer version of this application and cannot be opened"


any advice plz.

thanks

6
Open Discussion / Re: Raspberry pi
« on: April 14, 2015, 03:30:50 AM »
Hi,

is it possible to copy the AdvancedHMI on the desktop of the Raspberry, and without executing the application on the USB pen drive.
just to use the /bin folder on the dekstop of the Raspberry and run on the desktop.

many thanks

Ibrahim

7
Open Discussion / Re: AdvancedHMI on Webpage
« on: April 01, 2015, 09:13:17 AM »
Hi Mariley2250,


that is good idea, if you can do or start how to access AdvancedHMI on http protocol.
and i hope you will get some others interest if you start it.

we hope you will share us with your new idea.

many thanks

8
Open Discussion / Re: AdvancedHMI on Webpage
« on: March 31, 2015, 03:45:59 AM »
Hi,

realy its good idea to get access the AdvancedHMI on http protocol, maybe in the future,
the Raspberry Pi,  its working, and i have test it both Raspberry Pi 2 and the old one.
both working, but the Raspi 2 is faster than the old one.

and you can find the instructions on how to do raspi with AHMI this link

http://advancedhmi.com/forum/index.php?topic=693.0


Thanks

9
Open Discussion / Re: AdvancedHMI on Webpage
« on: March 31, 2015, 01:50:27 AM »
Hi,

its was the best to get AdvancedHMI on the web interface.
and i have asked before this question, and the answer i got was (AdvancedHMI was not designed web interface)
and you can read this link.

http://advancedhmi.com/forum/index.php?topic=523.0

thanks

10
Open Discussion / Re: Raspberry pi
« on: March 26, 2015, 12:17:21 PM »
Hi,

Many thanks,

the Raspberry pi 2, is very ver faster than the B model.
even updating and installation time is less than the Raspberry Pi B, its around 1 hours , you can finish updating and the installation of the monos.

is there some1 can help me how to run the application on startup,
i mean to run the AdvancedHMI after the raspberry pi starts up in the GUI.


Thanks

Ibrahim

11
Open Discussion / Re: Raspberry pi
« on: March 24, 2015, 12:53:03 PM »
its version 396.1

so let me do the AHMI again, or is there away i can update the versions.?

12
Open Discussion / Re: Raspberry pi
« on: March 24, 2015, 12:35:15 PM »
Hi,

during testing the new Raspberry pi 2, i have couldn't run the AdvancedHMI.exe
by using the mono command, and i get this messages.

mono AdvancedHMI.exe

(mono:7873): GLib-GObject-WARNING **: Attempt to add property GtkSettings::gtk-can-change-accels after class was initialised

(mono:7873): GLib-GObject-WARNING **: Attempt to add property GtkSettings::gtk-menu-popup-delay after class was initialised

(mono:7873): GLib-GObject-WARNING **: Attempt to add property GtkSettings::gtk-menu-popdown-delay after class was initialised

Unhandled Exception:
System.InvalidOperationException: WinForms_SeeInnerException ---> System.Exception: Incomplete Solution
  at MfgControl.AdvancedHMI.Drivers.CIP..ctor () [0x00000] in <filename unknown>:0
  at AdvancedHMIDrivers.EthernetIPforPLCSLCMicroCom.CreateDLLInstance () [0x00000] in <filename unknown>:0
  at AdvancedHMIDrivers.EthernetIPforPLCSLCMicroCom.set_IPAddress (System.String value) [0x00000] in <filename unknown>:0
  at (wrapper remoting-invoke-with-check) AdvancedHMIDrivers.EthernetIPforPLCSLCMicroCom:set_IPAddress (string)
  at MfgControl.AdvancedHMI.MainForm.InitializeComponent () [0x00000] in <filename unknown>:0
  at (wrapper remoting-invoke-with-check) MfgControl.AdvancedHMI.MainForm:InitializeComponent ()
  at MfgControl.AdvancedHMI.MainForm..ctor () [0x00000] in <filename unknown>:0
  at (wrapper managed-to-native) System.Reflection.MonoCMethod:InternalInvoke (System.Reflection.MonoCMethod,object,object[],System.Exception&)
  at System.Reflection.MonoCMethod.InternalInvoke (System.Object obj, System.Object[] parameters) [0x00000] in <filename unknown>:0
  --- End of inner exception stack trace ---
  at MfgControl.AdvancedHMI.My.MyProject+MyForms.Create__Instance__[MainForm] (MfgControl.AdvancedHMI.MainForm Instance) [0x00000] in <filename unknown>:0
  at MfgControl.AdvancedHMI.My.MyProject+MyForms.get_MainForm () [0x00000] in <filename unknown>:0
  at MfgControl.AdvancedHMI.My.MyApplication.OnCreateMainForm () [0x00000] in <filename unknown>:0
  at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun () [0x00000] in <filename unknown>:0
  at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run (System.String[] commandLine) [0x00000] in <filename unknown>:0
  at MfgControl.AdvancedHMI.My.MyApplication.Main (System.String[] Args) [0x00000] in <filename unknown>:0
[ERROR] FATAL UNHANDLED EXCEPTION: System.InvalidOperationException: WinForms_SeeInnerException ---> System.Exception: Incomplete Solution
  at MfgControl.AdvancedHMI.Drivers.CIP..ctor () [0x00000] in <filename unknown>:0
  at AdvancedHMIDrivers.EthernetIPforPLCSLCMicroCom.CreateDLLInstance () [0x00000] in <filename unknown>:0
  at AdvancedHMIDrivers.EthernetIPforPLCSLCMicroCom.set_IPAddress (System.String value) [0x00000] in <filename unknown>:0
  at (wrapper remoting-invoke-with-check) AdvancedHMIDrivers.EthernetIPforPLCSLCMicroCom:set_IPAddress (string)
  at MfgControl.AdvancedHMI.MainForm.InitializeComponent () [0x00000] in <filename unknown>:0
  at (wrapper remoting-invoke-with-check) MfgControl.AdvancedHMI.MainForm:InitializeComponent ()
  at MfgControl.AdvancedHMI.MainForm..ctor () [0x00000] in <filename unknown>:0
  at (wrapper managed-to-native) System.Reflection.MonoCMethod:InternalInvoke (System.Reflection.MonoCMethod,object,object[],System.Exception&)
  at System.Reflection.MonoCMethod.InternalInvoke (System.Object obj, System.Object[] parameters) [0x00000] in <filename unknown>:0
  --- End of inner exception stack trace ---
  at MfgControl.AdvancedHMI.My.MyProject+MyForms.Create__Instance__[MainForm] (MfgControl.AdvancedHMI.MainForm Instance) [0x00000] in <filename unknown>:0
  at MfgControl.AdvancedHMI.My.MyProject+MyForms.get_MainForm () [0x00000] in <filename unknown>:0
  at MfgControl.AdvancedHMI.My.MyApplication.OnCreateMainForm () [0x00000] in <filename unknown>:0
  at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun () [0x00000] in <filename unknown>:0
  at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run (System.String[] commandLine) [0x00000] in <filename unknown>:0
  at MfgControl.AdvancedHMI.My.MyApplication.Main (System.String[] Args) [0x00000] in <filename unknown>:0

is there someone have got this problem and how you have solved plz.

many thanks

13
Support Questions / Re: Changing IP address at runtime
« on: March 20, 2015, 07:41:11 AM »
Hi Archie,

thanks for the supporting the community.

i checked and worked the new version about the BITs (0/1) from the 'vb' bush buttoms.

thanks again.

14
Open Discussion / Re: Raspberry pi
« on: March 20, 2015, 07:37:14 AM »
Hi Archie,

thanks alot,
after getting porblems, its working perfectly.

and the problem was getting was, i tried to copy the Debug folder into the SD micro that is running the Raspberry pi,
after i run on the usb stick its working perfectly.

thanks

15
Support Questions / Re: Changing IP address at runtime
« on: March 17, 2015, 06:17:36 PM »
hi,

thanks alot,

can you plz let us know links that we can download the old versions of the AdvancedHMI

thnks

Pages: [1] 2 3