Digital counter Display

[bowman@bcs4support.com]

I have a pulse counter for a flow meter that totalizes pulses to display in gallons.  The accuracy of the counter in the PLC is to 5 decimal places.  I only want to see he hole number portion in the HMI display.

How to display only the hole number portion of the PLC data?

Thanks is advance.

[Archie]

With a BasicLabel you can set the ValueScaleFactor to 0.0001

[bowman@bcs4support.com]

I am using the AnalogValueDisplay if that makes any difference.  The values in the memory location in the PLC can be 608.59756.  I only want to display the 608 portion.

Sorry if I got you confused.  Any suggestions?

Thanks

[Godra]

Use its NumericFormat property and set it to "0000" (the number of 0 characters can be equivalent to the number of digits of the highest rounded received value but can also be more or less than that number).

[Vitor]

In the NumericFormat property just put N0.
This way it follows the numeric format of your system.
If you want 1 decimal place it will be N1, N2 for 2 decimals and so on