On some controls the display can use an Offset as well as a ScaleFactor. But the Keypad does not give this same functionality. This can be fairly easily added with the following steps. The edited file is attached that you can download and replace the original in your solution (see below how to use the attached file).
1) In Solution Explorer expand down the AdvancedHMIControls project
2) Expand down the \ControlsFolder
3) Right Click AnalogValueDisplay and select View Code
4) Scroll down to about line 566 until you find:
Public Property KeypadScaleFactor() As Double
5) Scroll down past the next End Property
6) Insert this code:
Private m_KeypadScaleOffset As Double = 0
Public Property KeypadScaleOffset() As Double
Get
Return m_KeypadScaleOffset
End Get
Set(ByVal value As Double)
m_KeypadScaleOffset = value
End Set
End Property
7) Scroll down to about line 639 and look for:
If m_KeypadScaleFactor = 1 Or m_KeypadScaleFactor = 0 Then
8- Modify the If-Then block of code to this
If (m_KeypadScaleFactor = 1 Or m_KeypadScaleFactor = 0) And m_KeypadScaleOffset <> 0 Then
m_ComComponent.Write(m_PLCAddressKeypad, KeypadPopUp.Value)
Else
If m_KeypadScaleFactor = 0 Then
m_KeypadScaleFactor = 1
End If
m_ComComponent.Write(m_PLCAddressKeypad, Convert.ToString(CDbl(KeypadPopUp.Value - m_KeypadScaleOffset) / m_KeypadScaleFactor) + m_KeypadScaleOffset)
End If
To insert the attached file into your solution:
1) Windows->Close All Documents
2) In Solution Explorer expand down the AdvancedHMIControls project
3) Right click the \Controls folder and select Add Existing
4) Browse to and select the attached file that was downloaded
5) Select replace
6) Rebuild Solution
