Author Topic: Advanced HMI doesn't like decimals?  (Read 7855 times)

Godra

  • Hero Member
  • *****
  • Posts: 1447
    • View Profile
Re: Advanced HMI doesn't like decimals?
« Reply #15 on: June 28, 2024, 02:46:51 AM »
Enabling or disabling byte and / or word swap in the driver itself should only be done if your BasicLabel displays incorrect values (which don't match what's in the PLC).

I think that there should be only 1 correct combination that produces correct values (not a 100% sure about this).

Also, check the following topic about formatting the text in the BasicLabel:

   https://www.advancedhmi.com/forum/index.php?topic=2490.0


MrOverCast

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: Advanced HMI doesn't like decimals?
« Reply #16 on: June 28, 2024, 02:52:53 AM »
Enabling or disabling byte and / or word swap in the driver itself should only be done if your BasicLabel displays incorrect values (which don't match what's in the PLC).

I think that there should be only 1 correct combination that produces correct values (not a 100% sure about this).

Also, check the following topic about formatting the text in the BasicLabel:

   https://www.advancedhmi.com/forum/index.php?topic=2490.0

Perfect! thanks this solved all my problems. Now its displaying the value I want!

Thanks guys for all the help