In the PLC I have a 16 Bit Register linked to a 3 Position Selector Switch on the HMI. Value of #0-Hand, #1-Off, #2-Auto. On the AdvanceHMI I thought it might be easier to have 3 separate Basic Buttons. Depending on which is pressed it writes those values to the Address linked to the Switch versus having 3 separate Basic Buttons that engage the Boolean Address that in turn stores the correct value to the Switch.
For the Basic Button there is an option for ValueToWrite where I would assume I put thte #0, #1, #2 depending on which position the switch would be in if pressed. However, I'm not seeing a location that makes sense for the address to go to have the value stored.
