Omron C200

[Neeh]

I am connecting to Omron C200 PLC using serialhostlink at 19200,7,E,2 and I have a basic label with PLCAddressValue = 100.01.  It just toggles every second. 
There is no error indication but the label does not show the value.  What am I missing?

[Archie]

Try using D0 in both PLCAddressValue and PLCAddressClick. See if it shows the value and lets you change it.

[Neeh]

0.00 or 0.01 works but not 100.01 etc.

[Archie]

If you are using 3.99y Beta, set EnableLogging to True.
Put only 1 BasicLabel on the form with PLCAddressValue set to 100.01
Run the application for about 30 seconds.
Look in AdvancedHMI\bin\Debug for the log file
Post that file here

[Neeh]

Attached is the log file.

[Archie]

- Download the attached patch
- Open your solution in VS
- In Solution Explorer, expand down the AdvancedHMIDrivers project
- Right click the support folder and select Add->Existing Item
- Browse to the file downloaded from here
- Rebuild the solution

Let me know if that resolves the issue

<<Attachment removed. Will be part of 3.99y Beta 19>>

[Neeh]

That resolved the issue.

What is the proper notation to addressing: DM, HR, TC, etc. ?

[Archie]

Typically just a single letter prefix such as D100

You can also use address modifiers to get long integers, float, and BCD. For example:

D100@F
D000@L