AdvancedHMI Videos

[Archie]

Video showing how to use raw serial port communications to display data from an Arduino

https://www.youtube.com/watch?v=y5O6nHqRJa4

[Archie]

Using AdvancedHMI with Delta DVP PLC

https://www.youtube.com/watch?v=BpoNkyQ31y4

[Archie]

If you understand Korean, here is a video that mentions AdvancedHMI

https://www.youtube.com/watch?v=KemyPbxgvYo

[dmroeder]

If you understand Korean, here is a video that mentions AdvancedHMI

https://www.youtube.com/watch?v=KemyPbxgvYo

It's a lot more entertaining if you turn on subtitles and auto translate to English.

[Archie]

If you understand Korean, here is a video that mentions AdvancedHMI

https://www.youtube.com/watch?v=KemyPbxgvYo

It's a lot more entertaining if you turn on subtitles and auto translate to English.

That is hilarious. Some of the translated random gibberish actually forms comical sentences. I never knew of the automatic subtitle and translation capability on Youtube.

[Archie]

Frequently I refer to AdvancedHMI as being fast. This of course can apply to several different aspects, such as fast development time, fast/responsive running, fast communications, etc. To demonstrate one aspect of what I mean by fast, I made a short video clip showing the refresh rate of a screen from a project I recently deployed. This demo shows the position of a hydraulic cylinder as it moves.

https://www.youtube.com/watch?v=XplLbZuOWTg

The PollRateOverride is set to 50ms. I originally had it updating faster, but when it gets to the point that is faster than any person can make sense of the numbers, it unnecessarily uses CPU and network bandwidth.

This application is running on an AdvancedHMI 15" panel PC.

[Phrog30]

If it's true 50ms, that's 20 frames per second. I agree it really doesn't need to be any faster than that.

[Archie]

https://www.youtube.com/watch?v=UGBRoHeJtyk

[prof-nova]

https://www.youtube.com/watch?v=ulwHis8lJTA&feature=youtu.be

[Archie]

https://www.youtube.com/watch?v=brL_Hx2Otpg

[bachphi]

https://www.youtube.com/watch?v=brL_Hx2Otpg

Oddly enough, these Koreans guys must be eating too much of KimChi, there were several rolls of toilet paper :=)

[prof-nova]

Another one:

https://www.youtube.com/watch?v=LhLZkZOxbNw&t=1s

[Archie]

Another one:

https://www.youtube.com/watch?v=LhLZkZOxbNw&t=1s

For your speed test you may be able to tweak it more by experimenting with how high your device will let you increase MaxReadGroupSize. Also the beta version 3.99y has further improved performance of subscriptions.

[prof-nova]

Another one:

https://www.youtube.com/watch?v=LhLZkZOxbNw&t=1s

For your speed test you may be able to tweak it more by experimenting with how high your device will let you increase MaxReadGroupSize. Also the beta version 3.99y has further improved performance of subscriptions.

I made some extra tests with changing the MaxReadGroupSize property:
- 5 => for 100 tags - 6~7 reads/sec     for 200 tags - 4 reads/sec
- 10 => for 100 tags - 10 reads/sec     for 200 tags - 8~9 reads/sec
- 20 => for 100 tags - 20 reads / sec     for 200 tags - 18 reads/sec
- 25 => for 100 tags - 25 reads/sec     for 200 tags - 22 reads / sec
- 30 => for 100 tags - 28~29 reads/sec     for 200 tags - some tags could not read
- 50 => for 100 tags - some tags are very slow to refresh
So with my device and my computer, if I wanna read about 200 tags simultaneously, the best results were achieved with a MaxReadGroupSize property of 25.
I will try to migrate to the latest version.

[Archie]

https://www.youtube.com/watch?v=su4euEKTxEI